Your Best Guide To Slipform Construction For Your Project

Modern construction techniques must evolve to meet numerous client demands and structural needs of the contemporary world. Ideally, construction projects must deliver the results desired by the investor at a reasonable cost, and that means using state-of-the-art methods to build structures. One of the proven methods is slipform construction. Slipform construction is essential for fast and precise completion of horizontal and vertical construction. It replaces conventional construction systems that take too much time and require lots of input from the builders. In this piece, you will learn everything you want to know about slipform construction and the reason it is a good choice for your project.

The Primary Components

Certain components must be present for slipform construction to happen. First, you must have the yoke legs used to joist and hold the weight of the slipform structure as you start the construction process. The yoke legs are an important foundational feature of the structure you are building. They link various parts of the structure such as the beams, work platforms and scaffolds. Secondly, you need brackets that secure on each of the yoke legs you are using in the projects. The brackets make it easy for the builders to pour concrete while acting as the reinforcement units you need. Lastly, you also need lifting jacks and strand rods that will help you hoist and move the whole assembly.

Getting It Right

If you want to get the best results from slipforming technology, put the fast hardening and cooling attribute of cement to good use. Make sure that your builders are using concrete in the right state. It should not be too soft or too hard. The concrete also needs to have the right proportions of other ingredients such as damp-resistance additives. Essentially, your reason for getting the mixtures right is to make sure that the concrete is workable and offers adequate support to the rest of the structure as it cures.

The Benefits You Get

  • Reduced wastage — one of the biggest challenges of using traditional building methods is the high amount of materials that go to waste. Joining separate materials piece by piece means losing lots of concrete between the individual joints. Slipform construction eliminates this bottlenecks through the continuous and steady pouring of concrete.
  • Fast-paced construction — in slipform construction, you start by preparing the foundation followed by placement of the yokes. The construction process can start immediately as the liquid concrete hardens, unlike traditional building techniques.

Contact a slipform contractor to learn more.

Share